Archive for the ‘music’ tag
Vinyl Film
Vinyl Film
Few things about Window Film
Heat rejection films are normally applied to the interior of flat glass windows to reduce the amount of infrared, visible light, and ultraviolet (UV) radiation entering windows. Such films are either dyed or metalized (which can be transparent to visible light) to convert incoming solar radiation to infrared radiation, which is then rejected back through the glass to the exterior. They usually cost 10-15 percent more than regular windows but can reduce energy loss by as much as 30-50 percent." Window film can save you some money.
To keep the sun's heat out of the house, a low-emissivity coating should be applied to the outside pane of glazed windows. If the windows are designed to provide heat energy in the winter and keep heat inside the house (typical of cold climates), the low-emissivity coating should be applied to the inside pane of glazed windows. Such films also reduce the amount of visible and ultraviolet light entering a window, and are often applied to reduce fading of the contents of a room. Silvered film may also be employed to the same end. New technology spectrally selective films that block certain wavelengths of the suns infra red energy reject solar heat without reducing natural light.
Security films are applied to prevent glass from shattering. Typically applied to commercial glass, these films are made of heavy-gauge plastic and are intended to maintain the integrity of glass when subject to heavy impact. The most robust security films are capable of preventing fragmentation and the production of hazardous glass shards from forces such as bomb blasts. Some companies have even experimented with bullet ballistics of multiple layers of security film.
These security films, if applied properly, can also provide protection for vehicles.These security films are often tinted and can be up to 400 micrometers (µm) thick, compared to less than 50 µm for ordinary tint films. If anchored correctly, they can also provide protection for architectural glazing in the event of an explosion. A layer of film (of 100 µm thickness or greater) can prevent the ejection of spall when a projectile impacts on its surface, creating small dagger-like shards of glass that can cause injury.
Graphic design films are generally colored vinyl or frosted. Frosted finish films closely resemble sandblasted or acid-etched glass, while vinyl films are available in a range of colors. Both types of films are commonly used in commercial applications.
Privacy films reduce visibility through the glass. Privacy film for flat-glass commercial and residential applications may be silvered, offering an unimpeded view from the low-light side but virtually no view from the high-light side. It may also be frosted, rendering the window translucent but not transparent. Privacy films for automobiles are available in gradients of darkness, with the darker tints commonly known as "limo tint."
The thicker window films known as safety and security window film are designed to perform under extreme conditions, and as such there are specific standard criteria these films should meet, such as American standards ANSI Z.97, CPSC 16 CFR 1201, Cat II (400 ft-lb), and the British Standards BS 6206 (Class A, B, C). The European Committee for Standardization offer the EN12600 standard Classification of Resistance of Glazing to Impact. Often, building codes dictate that a film must have a report verifying that it has met at least one of these standards.
About the Author
Dragan Stojanovic
Google Advertising professional
 |
 high quality glow in the dark vinyl film  US $12.99
|
 1 Roll 24" X 10' Black Gloss Vinyl Sign Film US $7.99
|
 24" x 10yd GLOSS WHITE w/ BLUE LINER sign vinyl film US $24.99
|
 Gloss Black Sign Vinyl Plotter Cutter Roll * Film US $4.98
|
 1 Roll 24" X 48" White Gloss Vinyl Sign Film US $3.49
|
 Matte Black - Flat Black Sign Vinyl Plotter Cutter Roll * Film US $4.98
|
 Arlon CalPlus Sign Vinyl Film White 15"x10yd perforated US $19.98
|
 Arlon CalPlus Sign Vinyl Film White 15"x10yd non-perf US $19.98
|
 Arlon CalPlus Sign Vinyl Film Matte Black 24"x10yd roll US $35.97
|
 Silver Sign Vinyl Plotter Cutter Roll * Film US $4.98
|
 Arlon CalPlus Sign Vinyl Film Matte Black 24"x50yd roll US $102.90
|
 24" x 10yd Cast High Performance sign vinyl film U PICK US $54.99
|
 15" x 50yd Roll Black High Gloss Sign Vinyl Film (C502) US $49.99
|
 Matte Black 24" x 10yd Roll Sign Vinyl Film US $24.99
|
 SILVER SKULL & BONES Sheet Adhesive VINYL Decal FILM US $3.59
|
 15" Wide Violet LG Chem Cutting Vinyl Sign Die Cut Plotter Film Decal US $.99
|
| Powered by phpBay Pro |
Vinyl Application Transfer
Vinyl Application Transfer
Best Carpet Pad Vinyl and linoleum
A common thing that can happen with the wrong type of pad mat vinyl and linoleum is that the carpet pad can damage the floor. There are many styles of pads available that contain an adhesive that can stick and damage the vinyl. Pads safer and more best to use a vinyl carpet and linoleum are a strong sense of felt or rubber mats and carpet pad combination.
I often hear customers asked me what kind of rug pad is better for vinyl flooring and linoleum. These same customers who have either had a bad experience with a carpet pad on your floor or has been informed by the manufacturer of floor care in choosing the right carpet pad for the vinyl floor. Unfortunately, many styles of pads available that claim to work on all hard floors, but can damage many types of plants, including vinyl and linoleum.
The best option for a carpet pad under the carpet on the floor vinyl and linoleum a title = "Recycling of felt carpet"> felt the recycling of carpet or target = "_blank" title = "Natural rubber carpet pad"> natural rubber carpet pad. Felt carpet recycling can be used under carpets that do not tend to slide. As there is no rubber mat pad that does not stop sliding. This felt carpet is a great area under carpets that are too large and heavy to move furniture or have to keep it down. For a mat tends to slide on a floor of vinyl or linoleum, the pad is a rubber mat felt natural and recycled. Natural rubber should not be confused with the imitation of rubber or like substance that can damage the floor. Natural rubber is completely safe for all vinyl and linoleum and is not transferred to the ground.
I saw a lot of vinyl damaged linoleum and carpet looks thin wafers available in many types of chips shops. The reason for this type of damage carpet pad field is that the carpet pad contains a chemical adhesive sprayed on it. This adhesive is what can be transferred to vinyl or linoleum and cause irreversible damage. And a felt carpet pad, rubber and contains no glue or application and does not transfer anything to the ground.
For those seeking way to protect carpets and protect a vinyl or linoleum, carpet pad right will make all the difference. Be sure to find a target = "_blank" title = "Carpet pad Corner" store, "which provides a quality recycled recycled felt or felt and the combination of natural rubber pad to extend the carpet the life of your carpet and floor.
About the Author
Luis Santamaria has been in the area rug flooring industry for several years. His expertise is in rug and floor preservation. One important aspect of preserving any area rug and any hard floor is by using a quality rug pad. You may read more at www.rugpadcorner.com.
whats the best/most effective method transferring my record collection to my mac to catalogue my dj collection?
I'm a house dj & FINALLY getting round to cataloguing my entire vinyl collection to my mac, so i can dj with just cds in the future. Theres SO many different software applications available (final vinyl, audio audacity etc) - which one is best. Also, what level do I record the tracks at to get the best recording? What format do I record them to on my mac - aiff? mp3? apple lossless? etc.
MANY many thanks - the whole process is quite daunting - thats why I want to get it right from the start so I dont find myself going back and rerecording earlier tracks in 6 months time when i have found better methods to do so (!?) 
urm. not sure, but this could help if you mean what i think you mean http://www.iwantoneofthose.com/instant-music-vinyl-cassette-ripper/index.html
|
 30" X 300' VINYL APPLICATION TRANSFER TAPE PLOTTER US $67.50
|
 24 x 300 CLEAR VINYL GRAPHICS APPLICATION/TRANSFER TAPE US $58.80
|
 24" X 300' VINYL APPLICATION TRANSFER TAPE PLOTTER US $54.00
|
 8 x 300 CLEAR VINYL GRAPHICS APPLICATION TRANSFER TAPE US $19.60
|
 6" X 300' VINYL APPLICATION TRANSFER TAPE PLOTTER US $13.50
|
 8" x 300 CLEAR VINYL GRAPHICS APPLICATION/TRANSFER TAPE US $19.60
|
 15" X 300' VINYL APPLICATION TRANSFER TAPE US $33.75
|
 16" X 300' VINYL APPLICATION TRANSFER TAPE US $38.00
|
 12”x300' R-Tape 4075 High Tack Application Tape Premask Sign Vinyl Transfer Wet US $38.00
|
 12 x 300 CLEAR VINYL GRAPHICS APPLICATION TRANSFER TAPE US $32.99
|
 12" X 300' VINYL APPLICATION TRANSFER TAPE US $30.99
|
 14" X 300' VINYL APPLICATION TRANSFER TAPE US $34.99
|
 36" Adhesive Transfer Tape Great for Vinyl Application US $95.60
|
 24" Adhesive Transfer Tape Great for Vinyl Application US $65.90
|
 12" Adhesive Transfer Tape Great for Vinyl Application US $35.80
|
 Transfer Tape/Application Tape Use with Vinyl 4 sheets size 12" X 24" US $7.95
|
 Vinyl Application Transfer Tape Professional Applicator US $85.95
|
 24" Vinyl Cutter Transfer Application Tape US $52.95
|
 48" Vinyl Cutter Transfer Application Tape US $110.95
|
 24" Vinyl E-Z Transfer Tape & Application Kit US $79.95
|
 24" Vinyl Cutter Transfer Tape & Application Kit US $154.00
|
 6" APPLICATION TRANSFER Paper TAPE 300 ft. roll for Vinyl PLOTTER cutter US $15.99
|
| Powered by phpBay Pro |
Tape Vinyl
Tape Vinyl
when I record from vinyl to tape the play back volume is low.playing records and tapes are ok what do i need?
The record player is connected to the audio tape by means of a 7 pin din plug, and on the amplifier side and 4 jack plugs on the tape recorder.
It's all about audio signal levels - The signal produced by a record player stylus is a fraction of the signal level produced by a tape deck and in-fact requires special (RIAA) amplification to bring it up in the first place.
Usually the amplifier input has a dedicated input marked 'phono' for the purpose. There are seperate amplifier boxes available to do this conversion and amplification if it really is a problem. They produce similar output levels to the tape deck.
|
 (LOT OF 11) 3M 764 Red Vinyl Tape 43424 US $33.55
|
 Lot of 15 3M 471 VINYL TAPE (15 rolls) US $99.99
|
 (LOT OF 13) 3M 764 Green Vinyl Tape 43434 US $38.06
|
 NEW HIGH INTENSITY REFLECTIVE TAPE VINYL 50mm x 5m ROLL US $12.63
|
 3M Vinyl Tape 471 1/4in X 36yds Blue US $40.00
|
 Scotch 3m super 33+ vinyl electrical tape 10 roll box US $34.95
|
|
NEW HIGH INTENSITY REFLECTIVE TAPE VINYL 50mm x 5m ROLL US $12.63
|
 2" x 150 ft Roll Vinyl Pinstriping Pinstripe Tape US $44.95
|
 1/2" x 150ft Pinstripe Vinyl Pinstriping Tape Stickers US $19.95
|
 24”x90' Application Transfer Tape Premask Vinyl Cutter US $30.00
|
 3/4" x 150 ft Roll Vinyl Pinstriping Pinstripe Tape US $24.95
|
 NEW HIGH INTENSITY REFLECTIVE TAPE VINYL 100mm x 3m ROLL US $15.00
|
|
NEW HIGH INTENSITY REFLECTIVE TAPE VINYL 100mm x 3m ROLL US $15.00
|
30" X 300' VINYL APPLICATION TRANSFER TAPE PLOTTER US $67.50
|
 30 Scotch Super 33+ Vinyl Electrical Tape, 3/4 x 66 ft US $84.99
|
|
24 x 300 CLEAR VINYL GRAPHICS APPLICATION/TRANSFER TAPE US $58.80
|
24" X 300' VINYL APPLICATION TRANSFER TAPE PLOTTER US $54.00
|
 NEW HIGH INTENSITY REFLECTIVE TAPE VINYL 100mm x 1m ROLL US $6.15
|
 NEW HIGH INTENSITY REFLECTIVE TAPE VINYL 100mm x 5m ROLL US $23.69
|
 6"x 150' White Reflective Vinyl Tape US $60.00
|
 Silver Chrome Mirror Vinyl Tape 5" wide x 25 feet. US $19.95
|
 3M Scotch 35 White Vinyl Electrical Tape — 10 Pack US $25.00
|
 1 Roll VINYL TAPE - White - 3" (72mm) X 108 FT US $12.85
|
 10 Scotch Super 33+ Vinyl Electrical Tape, 3/4 x 66 ft US $32.99
|
 20 Scotch Super 33+ Vinyl Electrical Tape, 3/4 x 66 ft US $60.00
|
 24" X 100yd CLEAR Application Premask Tape sign vinyl US $65.99
|
 3/4" x 36yd High Bond Vinyl Banner Hem Seam Tape US $10.99
|
 Reflective Vinyl Warning Tape 2" x118" Red/Yellow Free Shipping US $4.99
|
| Powered by phpBay Pro |
Transfer Vinyl
Transfer Vinyl
how can i transfer my vinyl records to cd, what software/hardware do i need?
still a novice so a detailed but brief explanation would be highly appreciated..thanks guys..
u basically patch ur phono out to ur mic in .. u may need a preamp its been so long i dont remember and probably depends on ur player .. u may have to use a line out of the reciever ..... and use a software recorder ... u can use anything from xps' built in recorder to audacity to somthing more advanced like soundforge ...
|
 6" X 300' VINYL APPLICATION TRANSFER TAPE US $13.50
|
24" X 300' VINYL APPLICATION TRANSFER TAPE PLOTTER US $54.00
|
 Heat Transfer Vinyl Siser Easyweed 15" x 10 yds US $70.00
|
 EasyWeed Cad-Cut Vinyl Heat Transfer Material 15"x10yds US $67.25
|
6" X 300' VINYL APPLICATION TRANSFER TAPE PLOTTER US $13.50
|
 Siser Weeder - Weeding Tool for vinyl and heat transfer material US $9.00
|
 Heat Transfer Vinyl 15" x 5 yds - Fluorescent Color US $45.90
|
8 x 300 CLEAR VINYL GRAPHICS APPLICATION TRANSFER TAPE US $19.60
|
8" x 300 CLEAR VINYL GRAPHICS APPLICATION/TRANSFER TAPE US $19.60
|
 20”x10' Heat Transfer Vinyl Glitter Colors Cutter Press US $50.00
|
| Powered by phpBay Pro |
Cut Software Vinyl
Cut Software Vinyl
I Need A Vinyl Sign Software?
I would like to be able to take images off Adobe Illustrator and cut them into vinyl. What software will do this.
You will need a vinyl cutter which generally has its own software which will likely have an Illustrator plugin of some sort.
Where I have provided files for vinyl cutting signwriters have generally requested an Illustrator or Illustrator eps file.
|
| Powered by phpBay Pro |